Kydex Sheet - .060" Thick, Calcutta Black, 12" x 12" 10PACK Review

Kydex Sheet - .060" Thick, Calcutta Black, 12" x 12" 10PACK

Check price now From Amazon.com
Kydex Sheet - .060" Thick, Calcutta Black, 12" x 12" 10PACK Feature
- Impact Strength - High
- Low Temperature Impact Strength - Average
- Tensile Strength - High
- Flexural Modulus - High
- Heat Deflection Temperature - High
KYDEXKYDEX sheet has excellent forming properties, which results in uniform wall thicknesses and crisp detail. KYDEX sheet forms to deep draws with low forces when heated to the upper end of the forming temperature range. Unlike many other thermoforming sheets, KYDEX sheet has unusually high resistance to hot tearing.
Forming Guidelines - Oven temperatures should be set differently than the settings used for ABS or FR-ABS.
- Typical heater settings (percentage timers) are 30% - 50% top heaters and 50% - 70% bottom heaters.
- The most frequent problem is trying to heat the sheet too quickly, particularly on the primary surface.
- Cycle times will vary depending on the oven conditions and grade of KYDEX sheet being formed.
- When forming KYDEX sheet, it is better to rely on the sheet appearance during heating than on fixed cycle times.
- Forming temperatures - Guidelines: (Sheet should not exceed 204°C (400°F).
165 - 177°C (330 - 350°F) for < 1.50mm (0.060").
182 - 196°C (360 - 385°F) for 1.50mm to 3.20mm (0.060" to 0.125").
196 - 204°C (385 - 400°F) for > 3.20mm (0.125")
- Ideally the core sheet temperature should be within 10°F of the surface temperature.
Sheet Appearance During HeatingAs KYDEX sheet is heated, the inherent stresses in the sheet will relax.
? Stage I: The heating is marked by wide undulations and softening.
? Stage II: The material will start to form small ripples (known as oil canning). .
? Stage III: The material will start to smooth out and sag (KYDEX sheet will generally sag less than other thermoplastics due to its high melt strength. .
? Stage IV: The ripples will have smoothed out indicating that most stresses have been removed. 10 to 30 seconds afterwards the sheet is ready to form.

Buy From Amazon.com
Looking for Kydex Sheet - .060" Thick, Calcutta Black, 12" x 12" 10PACK, Cheap Kydex Sheet - .060" Thick, Calcutta Black, 12" x 12" 10PACK,Kydex Sheet - .060" Thick, Calcutta Black, 12" x 12" 10PACK information and Kydex Sheet - .060" Thick, Calcutta Black, 12" x 12" 10PACK detail.
Tag:Kydex Sheet - .060" Thick, Calcutta Black, 12" x 12" 10PACK,Kydex Sheet - .060" Thick, Calcutta Black, 12" x 12" 10PACK Review